High Vacuum Double Stage Transformer Oil Purifier System
Machine,Used Insulation Oil Purifier
Description
transformer oil (insulation oil), because of high water, gas, and
solid particles content, is in general in lower insulation
performance. It can’t meet the requirement of IEC156 before any
treatment.
The oil in transformer during service, will get worse, because of
aging. AGING of oil will result in split during which the carbon
and water compound will be generated. This will reduce the oil
quality in a great deal of which will seriously intimidate
transformer reliabilities.
Then, the ZYD Transformer Oil Purifier System Machine is right
equipment to help you for the above purpose.
ASSEN ZYD Double stage Transformer Oil Purifier machine serves to
improve the properties of insulating oil. It eliminates the acid
nature, over moisture, traces of water, dissolved gases, and
particulate matter from the insulating oil effectively and rapidly.
The bottom line of this purification process is to enhance the
performance level of transformers, circuit breakers, mutual
inductors, cables, and capacitors. All these equipment and
machinery use an insulating system.
Technical Data
| Parameters | Unit | ZYD-30 | ZYD-50 | ZYD-100 | ZYD-150 | ZYD-200 | ZYD-250 | ZYD-300 |
| Flow | L/min | 30 | 50 | 100 | 150 | 200 | 250 | 300 |
| Working vacuum | MPa | 0.08 ～ 0.099 |
| Working Pressure | MPa | ≤0.3 |
| Temperature Range | ℃ | 20 ～ 80 |
| Power | | Three Phase 50HZ380V(as per the customer's requirements) |
| Working Noise | dB(A) | 75 | 75 | 75 | 80 | 80 | 80 | 80 |
| Heating Power | kW | 30 | 30 | 45 | 60 | 75 | 90 | 120 |
| Total Power | kW | 35.5 | 37.5 | 52.5 | 71.4 | 86.5 | 102.5 | 135 |
| Inlet/Outlet | mm | φ25 | φ32 | φ42 | φ50 | φ50 | φ60 | φ60 |
| Weight | kg | 600 | 800 | 1050 | 1400 | 1800 | 2000 | 2200 |
| Overall | Length | mm | 1050 | 1100 | 1200 | 1450 | 1600 | 1800 | 1900 |
| Width | mm | 750 | 800 | 950 | 950 | 1100 | 1200 | 1200 |
| Height | mm | 1350 | 1400 | 1500 | 1650 | 1800 | 1900 | 1900 |
After treatment,oil quality guarantees to the following
specifications.
| Moisture | PPM | ≤3 |
| Gas content | % | ≤0.01 |
| Impurity size | μ | ≤1 (no free carbon) |
| Breakdown voltage | kV | ≥75 |
| IFT | dynes/cm | ≥40 |
| Acid value | mgKOH/g | ≤0.03 |
| Dielectric loss factors | tgδ(90°C) | ≤0.001
|
Advantages:
1 Enhance the value of breakdown voltage of oil greatly.
2 Easy handling and maintenance. It is available that online work.
The plant can provide the ability of injection oil into the
transformers without extra accessory.
3 Lower maintenance and replacement expenses.
4 High efficiency and effectiveness while small size, light weight,
and low noise.
ON-site Project:
Our Services
- Your inquiry related to our products or prices will be replied in
24 hours.
- Well-trained and experienced staffs to answer all your enquires in
fluent English.
- Professional service from well-trained and experienced staffs is
customers’ best choice to secure good communication, on time
delivery, reliable warranty etc.
- OEM is available for Anern Products.
- Protection of your sales area, ideas of design and all your private
information.
Delivery:
Please contact us at any time.
