Why do we need an oil clean system?
Oils contamination(dirt, wear particles, etc.) shortens component
life due to increase abrasive wear systems have increased operating
pressures and closer valve tolerances which requires the best in
turbine oil services.
TYL coalescence separation fuel oil purification machine has five
filtration systems, combining precise filtration and dewatering two
functions into one efficient. The introduction of the US
"coalescing separation" technology for dehydration, which has high
efficient dehydration, especially is adapted to the large amount of
water separation from oil, dehydration ability is far better than
the centrifugal method, you can get rid of all of the oil-water
emulsion medium structure ; by filtration, particle filtration
system, the cleanliness of the medium can be controlled in a stable
state of the system requirements to ensure the cleanliness; the oil
does not change the physical and chemical properties, to extend the
service life of the oil; energy small, low operating costs;
excellent system configuration, continuous strong performance for
1. Using coalescing separation technology to demulsificate,
coalesce and separate the free water and the emulsified water.
2. It adopts special oil water separator without heating
requirement, and its dewatering efficiency is above 20 times of
other kinds of purifier.
3. As no heating is needed, energy consumption and operating cost
4. This machine is light and small size.
5. Low operation cost, 20%-40% lower than vacuum oil purifier,
centrifuge and plate frame pressure filter machine.
|Rated flow (L/min)||30||50||100||150||200||400|
|Recommended viscosity (CSt)||10-120|
|Rated pressure (Mpa)||0.6|
|The original pressure loss (Mpa)||≤0.1|
|Filtration precision before pump(μm)||100|
|First filtration precision(μm)||10,20,40|
|Secondary filtration precision(μm)||3,5,10|
|Voltage V)||Three-phase AC380V|
1.Your inquiry related to our products or prices will be replied in 24 hours.
2.Well-trained and experienced staffs to answer all your enquires in
3.Professional service from well-trained and experienced staffs is
customers’ best choice to secure good communication, on time
delivery, reliable warranty etc
4.OEM is available for ASSEN Products
5.Protection of your sales area, ideas of design and all your