6000 LPH High Vacuum Transformer Oil Treatment Plant
Application
ASSEN ZYD High Vacuum Transformer Oil Purification Plant was
designed according to decompression separation, precise filtration,
Spiral spray atomization separation technology, molecular
adsorption, vacuum drying principle. The treated oil can meet the
standard of the national standard.
Advantages:
1 Enhance the value of breakdown voltage of oil greatly.
2 Easy handling and maintenance. It is available that online work.
The plant can provide the ability to injecting oil into the
transformers without an extra accessory.
3 Lower maintenance and replacement expenses.
4 High efficiency and effectiveness while small size, lightweight,
and low noise.
Flow Chart:
The oil to be treated passes through a strainer and enters the
heater for heating, the heated oil will go through the
semi-precision filtration and arrived at the Spiral spray
atomization separation system, The insulating oil turns into a
coarse mist and falls onto the reaction tower to enter the vacuum
separation chamber. The moisture begins to evaporate and the oil
mist forms a three-dimensional, multi-layer evaporation structure
in the tank, which can be purified through a short-term cycle.
After dewater, degas, and impurity, acid removal, the treated oil
will go through precision filtration to achieved the purifier
circulation purpose. The Water vapor molecules and the hot air are
separate from the vacuum separation chamber enters the condenser,
most of the water vapor is condensed into water and stored in a
water tank. The hot air in the oil is cooled and discharged by a
vacuum pump.
Dielectric Oil Purifier Machine's Technical Features:
1.Advanced dehydrating and degassing system that uses large-area
three-dimensional flash distillation technique to remove harmful
composition in the oil such as water, air, and gas.
2. It can be widely used for oil filling for transformers and
circuit breakers under vacuum conditions.
3. Precise filtration system, high-quality filter element,
multi-stage filtration with gradual precision can help to remove
mechanical impurities in the oil.
4. An advanced fully automatic temperature controlling
system,liquid-level controlling system, defoaming controlling
system, pressure protecting system, and excellent configuration can
ensure the operation of the equipment with high performance.
5. Online work, allowing separated operation of manual operators
from machines with lamps indicating the condition for operation.
6. It is a humanization design with low noise, deep purification,
and long-time free maintenance to save cost from the running
process.
7. Purifiers are equipped with a chain safety protective system, an
interlocking oil drainage system, a vacuum system, and a heating
system, which avoids any possible negative impacts caused by
mal-operation.
After treatment,oil quality guarantees to the following
specifications.
| Moisture | PPM | ≤3 |
| Gas content | % | ≤0.01 |
| Impurity size | μ | ≤1 (no free carbon) |
| Breakdown voltage | kV | ≥75 |
| IFT | dynes/cm | ≥40 |
| Acid value | mgKOH/g | ≤0.03 |
| Dielectric loss factors | tgδ(90°C) | ≤0.001 |
Please contact us for more details.
Transformer Oil Treatment System Vacuum Transformer Oil Treatment Machine
