TYA lubricating oil purification machine is catered to reclaiming
leaked hydraulic oil whereby the removal of emulsified water and
dirt contamination is critical.
In most cases where a heat exchanger ruptures and floods a
hydraulic oil reservoir with water, It may take 4-6 oil changes to
completely remove water from a system, which can become costly. Our
plant is a cost-effective solution. Our system not only removes
free water from the reservoir but also removes emulsified water
from oil that may reside within system lines and cavities. This
service can be performed while the machine continues to operate,
therefore eliminating downtime.
TYA Hydraulic Oil Cleaning Machine TYA Hydraulic Oil Purification Machine
1. It adopts the coalescence and separation technique and
three-dimensional flash distillation technique, and it has a strong
ability to break the emulsion and remove water from the oil.
2. Optimized electric heating system with automatic constant
temperature controller ensures the oil temperature to be even and
3. Precise multi-stage filtration system helps remove different
kinds of impurities with a high-quality filter element of the
better ability to contain pollutants and long service life.
4. Advanced infrared oil level control system and pressure
protection device make operation simple and safe.
5. It can purify any kinds of turbine oil used in steam turbines
and water turbines online and onsite.
6. Air cooling system helps cool down air and gases from the flash
distillation column so as to extend the service life of the vacuum
pump, avoiding the inconvenience of water cooling.
7. The machine can also be installed with a digital flow meter and
timer to calculate and record the volume of output oil and working
hours (it's optional).
8. Aluminum electric control cabinet has the merits of heat
conducting and anti-explosion.
By using the ASSEN lube oil purifier machine you will benefit from
- Reduced wear
- Extended equipment life
- Increased productivity
lube oil purification's Technical Parameters:
|Vacuum Degree||MPa||-0.06 ~ -0.095|
|Temperature||ºC||0 ~ 100|
|Power Supply||3phrase,50Hz, 380V(or as needed)|
|Parameter After Purification|
|Demulsification value||min||New oil ≤15min, running oil ≤30min|
Please contact us for more details.